This system can be easily and precisely adjusted at any time using the easily accessible dial that you can even use with your skiing gloves. It also gives you comfort and maximum safety. Turn the dial to the right to tighten and to the left to loosen.This type of structure, known as In-Mold, features a polycarbonate outer shell that is moulded directly to the EPS liner. The inner EPS liner absorbs shocks in the event of a collision. The whole thing is extremely lightweight. We recommend changing your ski helmet at least every 5 years unless it has sustained a significant impact in the meantime.
Standard EN 1077:2007 is a European standard that applies to helmets used for cranial protection during downhill skiing and snowboarding. This standard tests the ability to absorb shocks and resistance to penetration. Class A: protects the top and back of the head, as well as the ears and the side of the head. Class B: Protects the top and back of the head but does not cover the ears. Measure your head's circumference in centimetres (around the middle of the forehead and just above the ears).
Choose the size that covers this measurement. Example: if you have a head circumference of 56 cm, you should try a helmet in size 55-59 cm. Take plenty of time to try it on properly. You shouldn't feel any areas of discomfort.
If you do then try another model. Always try your helmet with your mask, because not all helmets go with all masks. A helmet is compatible with a ski mask when there is no air space between the top of the mask and the helmet. During practice, the ski helmet must be properly fitted and adjusted.It is essential to choose the right size. The head circumference must be adjusted using the thumb wheel. The chinstrap must be properly adjusted.
It's a bit like the seat belt in a car: if it's too loose, it will not perform its function and you will be less protected. Avoid putting a thick hat under your helmet as this will move the helmet away from your head and you won't be as well protected. Opt instead for a very thin beanie or balaclava that does not affect your safety. A helmet has good insulating properties.There is often no point in adding anything else. Also, avoid adding a camera to your helmet as this can affect safety. The standard does not take into account any elements added to the helmet. Removable comfort foam machine-washable at 30°C. Foam 100% Polystyrene Shell 100% Polycarbonate Inner fabric 100% Foamed Polyurethane. Do not store in a damp place, near a source of heat or UV rays. Dry before storing, preferably in a fabric helmet bag. Replace any helmet that has sustained an impact. All Wedze products are tested under the actual conditions of use for which they were designed: in the snow, in the cold, and in all possible conditions you could come across when skiing.
The design teams, product managers, engineers and pattern makers check that the programme for which the product was designed and developed perfectly matches its use in the field. This item is in the category "Sporting Goods\Skateboarding\Protective Gear". The seller is "freness" and is located in this country: GB. This item can be shipped to all countries in Europe.